User Manual

Matrox M-Series – User Guide 11

3 Insert your Matrox card

Position your Matrox card over the

expansion slot you’ve chosen.

Push the card in firmly and evenly until

it’s fully seated in the slot.

Secure the bracket of your Matrox card

to the computer frame.

Your Matrox card is now installed.

Before restarting your computer

, connect your monitor or

monitors (see “Connecting your monitors”, page 14).

After connecting

, restart your computer and

install your Matrox software (see “Installing your Matrox software”, page 22).

Securing the bracket of your Matrox card

Matrox M9140 only

– To support the weight of your quad-monitor cable and avoid damaging your

graphics card, you also need to secure a washer to the bracket of your graphics card.

To secure the washer, slip it over the

monitor connector, then screw the

washer onto the bracket of your

graphics card.

Make sure the washer lies flat against the

frame of your computer.

WA R N I NG :

Inserting your Matrox card

into the wrong type of slot could damage

your card, your computer, or both.

PCI Express card

×16

×1

×4

×8

Washer

Graphics card