User Manual-Mac

86
Chapter 9, Using Matrox MXO2 with Supported Programs
Defining your capture settings
To capture video and audio in Premiere Pro using your Matrox MXO2 hardware,
you must define your capture settings as detailed in this section. For a list of the
input and capture formats that are supported on MXO2, and to view the MXO2
input scaling options, see Appendix C, “Matrox MXO2 Supported Input and
Capture Formats.”
1 In Premiere Pro, choose File > Capture.
2 In the Capture panel, in the Settings pane, under Capture Settings, click
Edit.
3 In the Capture Settings pane, select Matrox Recorder from the Capture
Format
list, and then click Configure.
4 In the Matrox Recorder Configuration dialog, select the Video format to
which you want to capture your source video.
5 Click Configure Codec to select and configure the capture codec. If you
want to use the Matrox MPEG-2 I-frame codec, see “Using the Matrox
MPEG-2 I-frame codec” on page 107 for details on configuring the codec.
6 Select the number of Audio channels to capture. If capturing Matrox
4VANC AFD or closed caption data (see “Closed captioning and AFD” on
page 93), you must capture 16 audio channels.