User Manual-Mac

93
Working with Adobe Premiere Pro
¦NoteIf a track that you’ll be recording your voice-over on already contains
audio at the current-time indicator, the audio will be overwritten by your
voice-over.
4 For each track selected in step 3, select the Matrox audio input channel that
you want to record from the Track Input Channel list at the top of the panel.
5 Select Meter Input(s) Only in the mixer’s menu to display the MXO2 audio
input levels in the meters.
¥Tip You can click the Solo Track button ( ) for a track on which you’ll
be recording audio to mute the audio playback of other audio tracks in your
sequence.
6 Test the audio input levels by speaking into the microphone, and watch the
levels in the meters. If needed, adjust the audio level on your source device
so that the input levels are sufficiently high but not clipping.
7 Click the Record button ( ) to prepare the sequence for recording.
8 Click the Play button ( ), or the Play In to Out button ( ) if you set
In and Out points, to start recording your voice-over.
¦NoteDuring recording, there’s a slight delay in the audio preview of your
voice-over. To mute the preview, click the
Mute Track button ( ) or you
can choose to lower the track volume by dragging the
Volume slider.
9 Click the Stop button ( ) to stop recording. Your voice-over will be added
to the selected audio tracks as .wav files.
10 To ensure proper A/V synchronization during playback when not recording a
voice-over, make sure that a Matrox audio option is not selected for the
Adobe Desktop Audio option (CC) or Default Device option (CS6) in the
Audio Hardware preferences (Premiere Pro > Preferences > Audio
Hardware
), and then select Matrox Player as the Audio Device and
Video Device in the Playback settings (Premiere Pro > Preferences >
Playback
).
Closed captioning and AFD
Matrox MXO2 provides two ways of working with closed caption and AFD data
in Adobe Premiere Pro:
• Matrox 4VANC tool (pages 94 and 96) The Matrox 4VANC tool lets you
capture and play back digital closed caption and AFD (active format
description) data along with your video. The Matrox 4VANC closed caption
and AFD data can be embedded in your video’s VANC on output for display
on an SDI or analog video monitor that supports closed captioning.
• Premiere Pro’s closed captioning (page 99) Matrox MXO2 supports
Adobe Premiere Pro’s closed captioning feature for playback. The closed
captions on your sequence can be embedded in your video’s VANC on