User Manual-Mac

100
Chapter 9, Using Matrox MXO2 with Supported Programs
d Specify where you want the closed caption data to be embedded in the
video signal during playback. Since MXO2 features simultaneous
outputs, you can select more than one of the following options.
• Embed in SDI VANC (HD/SD) Use this option if you want to play
back HD or SD video from MXO2’s SDI output, and embed the closed
captioning data in your video’s VANC.
• Embed in SDI Line 21 (SD) Use this option if you want to play back
SD video from MXO2’s SDI output, and embed the closed captioning
data on Line 21 of the VBI (vertical blanking interval) portion of your
video signal.
• Embed in analog Line 21 (SD) Use this option if you want to play
back SD video from any of MXO2’s analog outputs (component,
S-Video, and composite), and embed the closed captioning data on
Line 21 of the VBI (vertical blanking interval) portion of your video
signal.
¦NoteTo preview HD video with closed captioning on an SD monitor, you
must set the output that is connected to your monitor to SD (see “Specifying
your video output settings” on page 60), and select either
Embed in SDI Line
21 (SD)
or Embed in analog Line 21 (SD).
e In Premiere Pro, specify your playback settings as detailed in “Defining
your playback settings” on page 84.
f Play back your sequence or export your sequence to tape.
Overlay closed captions (CC)
This section details how to overlay the closed captions that are on your
sequence on all the MXO2 video outputs for playback using Premiere Pro
CC.
¦NoteThe closed captioning overlay is supported for playback only. The
overlay will not be exported to tape.
a In Premiere Pro, specify your playback settings as detailed in “Defining
your playback settings” on page 84.
b From the Program monitor pop-up menu, choose Closed Captioning
Display > Enable
.
c From the Program monitor pop-up menu, choose Overlay Settings >
Settings
, and in the Overlay Settings dialog, select Enable overlays
for Transmit
.
d Play back your sequence.
Overlay closed captions (CS6)
This section detailed how to overlay the closed captions that are on your
sequence on all the MXO2 video outputs for playback using Adobe Premiere
Pro CS6.