User Manual-Mac

110
Chapter 9, Using Matrox MXO2 with Supported Programs
Working with Adobe Encore
The MXO2 playback device for Encore lets you monitor video and audio from
your Encore project using the MXO2 outputs. For a list of the supported video
output formats for the MXO2 main and SD channels, and the supported video
formats for the MXO2 outputs, see Appendix D, “Matrox MXO2 Supported
Output Formats.”
Perform the following steps to output video and audio from the MXO2 outputs
during playback in Encore:
1 Start Adobe Encore and either open an existing project, or start a new
composition. If necessary, import your clip.
2 Choose Encore > Preferences > Audio/Video Out.
3 In the Preferences dialog, select Matrox Player from the Audio Device
list.
4 Under Video Device, select Matrox Player, and then click Setup beside
Matrox Player.
5 In the Matrox Player Setup dialog, set whether to output 8-bit or 10-bit
video, and then click
OK.
¦NoteThe Enable CC overlay on output (Adobe CS6) option in the
Matrox Player Setup dialog is not used.
6 Set the appropriate video and audio output settings in the Matrox Utilities
preferences window (see Chapter 7, “Configuring Your MXO2 System”).
¡ Important When using Matrox Player as the playback device in Encore,
make sure that a Matrox audio option is not selected as the
Audio Output
Device
from Encore > Preferences > Audio/Video Out.