User Manual-Mac

119
Working with Avid Media Composer and Symphony
To capture AFD and/or closed caption data, in Avid's Capture tool, enable
all 16 audio channels, set audio channels 15 and 16 to
Mono, and select 1:1
MXF
from the Res list.
¦NoteMatrox 4VANC is not available on Matrox MXO2 Mini.
5 Click the Hardware Setup ( ) button to open the Matrox Utilities
preferences window, and specify your Matrox capture settings as described
in “Specifying your A/V input settings” on page 57. If you’re capturing
Matrox 4VANC AFD and/or closed caption data, you must enable Matrox
4VANC capture in the
Matrox Utilities preferences window as described in
“Matrox 4VANC capture and playback” on page 68.
6 Capture as you would normally.
Adding a voice-over to your sequence
Matrox MXO2 supports the Audio Punch-In tool, which allows you to record
audio directly into the
Timeline to add voice-over narration, such as to add
commentary to newsreels and documentaries.
¦NoteThe Audio Punch-In tool supports recording to mono tracks only.
Connection and setup
1 Connect the input device (microphone) to the audio input on a source device,
such as a preamplifier, and then connect the audio output from the source
device to the corresponding audio input on your MXO2 hardware.
¦NoteThe Matrox hardware audio inputs are line level. Therefore, make sure
your audio equipment output matches.
2 From the Apple menu, click System Preferences, and then click the
Matrox Utilities icon.