User Manual-Mac

121
Working with Avid Media Composer and Symphony
1 With a sequence loaded in the Avid Media Composer/Symphony timeline,
choose
Tools > Audio Punch-In.
2 Select Matrox from the Input Source list.
¥Tip If Matrox MXO2 (serial number) Audio Input appears in the Input
Source
list instead of Matrox, the Matrox hardware is deactivated in Avid.
Click the Toggle Hardware button in Avid to activate the Matrox hardware,
and then select
Matrox.
3 Select the Matrox audio input channels that you want to record, and then
select the corresponding tracks on which you want to record. If you select an
existing track, you can replace all or part of the audio on the track with your
voice-over.
4 Click the Audio To o l button ( ), and use the controls and meters in the
Audio tool to test the audio input levels while speaking into the microphone.
If needed, adjust the audio level on your source device so that the input
levels are sufficiently high but not clipping.
¦NoteTo see the meters in the Audio tool, make sure that the In/Out toggle
buttons are set to
I (for Input):
For details on using the
Audio tool, see your Avid documentation.
Input selected