User Manual-Mac

172
Appendix B, Matrox MXO2 Connectors
SDI A and SDI B Provide two simultaneous outputs of the
same HD-SDI or SD-SDI video, with up to 16 channels of
embedded audio. You can also output closed captioning and
AFD data using the SDI outputs (see “Matrox 4VANC capture
and playback” on page 68). For each output, connect an SDI
video/audio cable to a video monitor, VTR, or other SDI
device. You can also perform surround sound monitoring
through the SDI output by connecting to a third-party device,
such as an SDI audio de-embedder.
Component video (Y, Pb, Pr) Allows you to output HD or
SD video to an analog component device. Connect component
Y, Pb, Pr video cables to a video monitor, VTR, or other
component device.
¦NoteThe component output supports YUV and RGB
devices. To set the component output type, see
“Specifying your video output settings” on page 60.
Y/C (S-Video) Provides an output for SD video to an analog
S-Video device. Connect an S-Video cable to a video monitor,
VTR, or other S-Video device.
Composite video (CVBS) Allows you to output SD video to
an analog NTSC or PAL device. Connect a composite video
cable to a video monitor, VTR, or other NTSC or PAL device.
AES/EBU digital audio Allows you to output stereo digital
audio. Connect a coaxial BNC audio cable to a VTR, audio
mixer, speakers, or other audio device.
¦NoteNot available on MXO2 LE.
Analog audio (balanced) Allows you to output
balanced stereo analog audio. Connect XLR
cables to a VTR, audio mixer, speakers, or other
audio device.