User Manual-Mac

190
Chapter E, Connecting and Using Matrox MXO2 Dock
Connecting MXO2 Dock to your MXO2 system
Use the Matrox MXO2 Dock docking station to connect MXO2 to your
computer’s Thunderbolt port. When doing this, it may take up to ten seconds for
your MXO2 to be detected by your system and its applications.
¡ Important Make sure that the Matrox PCIe cable is connected to MXO2 Dock
and MXO2 before connecting MXO2 Dock to your computer via the
Thunderbolt cable. If you want to disconnect or connect MXO2 when your
system is running, you must do it by disconnecting/connecting the Thunderbolt
cable. Do not disconnect the Matrox PCIe cable from MXO2 Dock, or MXO2,
when your Mac system is running.
Connecting to Matrox MXO2
Matrox MXO2 Dock
PCIe cable
²Caution To ensure functionality and avoid
damaging the PCIe cable or host connector, you
must connect the PCIe cable as shown in
“Ensuring proper PCIe cable connection” on
page 16.
To your computer’s
Thunderbolt port.
MXO2
(side view)
Thunderbolt cable
(Not included. A
Thunderbolt cable is
required to connect
Matrox MXO2 Dock to
your computer.)