User Manual-Mac

60
Chapter 7, Configuring Your MXO2 System
Specifying your video output settings
MXO2 features simultaneous video outputs that allow you to send your video to
a variety of devices at the same time. MXO2 provides two separate video output
channels to choose from: main channel and SD channel. The video output
settings allow you to set the main channel’s video format, assign a video channel
to an MXO2 output, and define the channel’s behavior. You can also select other
settings such as the scrub and pause method, and calibrate your HDMI monitor
for video.
¦NoteWhen capturing, MXO2 outputs your source video at the capture format.
The Matrox video output settings are ignored during capture.
For a list of the supported video output formats for the MXO2 main and SD
channels, and the supported video formats for the MXO2 outputs, see Appendix
D, “Matrox MXO2 Supported Output Formats.”
¦NoteWhen working with Apple Final Cut Pro X, changes made to certain
video output settings won’t take effect until you play back the clip in Final Cut
Pro X.
1 From the Apple menu, click System Preferences, and then click the
Matrox Utilities icon.
2 Click Video Output.
MXO2, MXO2 Rack, and MXO2 LE