User Manual-Mac

61
Specifying your video output settings
3 For MXO2 Mini only, from the Active analog output menu, select the type
of connection that you want to use for MXO2 Mini’s Y, Pb, and Pr output
connectors (see “Outputs” on page 167).
¦NoteWhen you connect an analog component device to MXO2 Mini, you
won’t be able to connect an S-Video or composite device at the same time. If
you’re outputting HD analog component video, the composite and S-Video
outputs will be invalid.
4 From the Set main channel format to menu, you can select the video
output format that you want for the MXO2 main channel. For a list of the
supported video output formats for the MXO2 main and SD channels, see
“Supported main and SD video output formats” on page 182.
$ Follow application Sets the main channel’s video output to match your
project’s video format, or to a compatible format for your project. For
example, if your project’s video format is NTSC, the MXO2 main channel
will be set to NTSC as well. If your project’s video format is 720p at
23.98 fps, the MXO2 main channel will be set to the compatible 720p at
59.94 fps output format.
$ 486p/576p Sets the main channel’s video output to either 486p or
576p, depending on your project’s video frame rate. For example, a 720p
MXO2 Mini