User Manual-Mac

64
Chapter 7, Configuring Your MXO2 System
11 From the Set component output to menu, select YUV or RGB to set the
type of video that is sent from MXO2’s component (Y, Pb, Pr) output. For
example, select
RGB if your MXO2’s component output is connected to a
device that accepts an RGB signal.
¦NoteComponent outputs are not available on MXO2 Mini.
12 Click the Calibrate button to calibrate your HDMI monitor or load HDMI
calibration settings using the Matrox HDMI Calibration Utility (see Chapter
8, “Calibrating Your HDMI Monitor for Video”).
¦NoteIn order to run the Matrox HDMI Calibration Utility, the HDMI output
type must be set to
RGB - calibrated (see step 10).
Specifying your audio output settings
MXO2’s simultaneous audio outputs allow you to send your audio to a variety of
devices at the same time. You can also map any audio track in your video
application to any MXO2 audio output. For descriptions of the MXO2 outputs,
see “Outputs” on page 167.
¡ Important Audio mapping must be disabled for surround sound HDMI audio
output.
1 From the Apple menu, click System Preferences, and then click the
Matrox Utilities icon.