User Manual-Mac

72
Chapter 7, Configuring Your MXO2 System
$ Embed in SDI VANC (HD/SD) Use this option if you want to play
back HD or SD video from MXO2’s SDI output, and embed the closed
captioning data in your video’s VANC.
$ Embed in SDI Line 21 (SD) Use this option if you want to play back
SD video from MXO2’s SDI output, and embed the closed captioning
data on Line 21 of the VBI (vertical blanking interval) portion of your
video signal.
$ Embed in analog Line 21 (SD) Use this option if you want to play
back SD video from any of MXO2’s analog outputs (component, S-Video,
and composite), and embed the closed captioning data on Line 21 of the
VBI (vertical blanking interval) portion of your video signal.
¦NoteTo preview HD video with closed captioning on an SD monitor, you
must set the output that is connected to your monitor to SD (see “Specifying
your video output settings” on page 60), and select either
Embed in SDI Line
21 (SD)
or Embed in analog Line 21 (SD).
7 Specify the appropriate settings in your video application. For information
on how to set your video application settings to capture, play back, and
export Matrox 4VANC closed captioning, see Chapter 9, “Using Matrox
MXO2 with Supported Programs.”
Specifying your Matrox WYSIWYG settings
The Matrox WYSIWYG settings configure the MXO2 video output when
working with Adobe After Effects (v12.x or earlier) and Photoshop only (see
Chapter 9, “Using Matrox MXO2 with Supported Programs”).
¦NoteIf you’re using Adobe After Effects v13.x, you don’t need to specify
WYSIWYG settings. Instead, you use the MXO2 playback device to output your
After Effects project using the the MXO2 outputs as explained in “Using Adobe
After Effects v13.x” on page 112.
1 From the Apple menu, click System Preferences, and then click the
Matrox Utilities icon.