User Manual-Mac

80
Chapter 8, Calibrating Your HDMI Monitor for Video
Enabling and disabling the Matrox HDMI
calibration settings
The HDMI calibration settings that are loaded for your system (see “Loading
Matrox HDMI calibration settings” on page 79) can be enabled or disabled.
When enabled, the video that is output from the MXO2 HDMI output will have
the color settings that are saved in the currently loaded calibration file. This is
used when you want to monitor video on your RGB HDMI monitor. Disable the
calibration settings if you want the HDMI video to be output from MXO2 with its
native color settings, such as when performing an edit-to-tape.
1 From the Apple menu, click System Preferences, and then click the
Matrox Utilities icon.
2 Click Video Output.
3 Under Miscellaneous, from the Set HDMI output to list, select RGB -
calibrated
to enable the loaded HDMI calibration settings. Depending on
your HDMI output device, select
RGB - native or YUV to disable the loaded
calibration settings. For more information on setting the MXO2 HDMI
output type, see “Specifying your video output settings” on page 60.