User Manual-Windows

214
Chapter 15, Using MXO2 with Webcam Applications
8 Click Apply and then OK to save your settings.
9 Start your webcam application and apply the following settings:
a Set the webcam or camera input to Matrox A/V Input. Some
applications may automatically be set to use the Matrox A/V input. You
should see your selected video source play back in your application’s live
preview window. If you don’t see your source video, check that your
Matrox MXO2 hardware and selected video source are properly
connected.
b Set the audio input to use the microphone input from your sound card.
¦NoteThe audio output from MXO2 is line level. Therefore, if you
connected the audio output from your MXO2 hardware to the microphone
input on your sound card and your webcam application provides a setting to
select the type of microphone input, set it to
Line In (High Definition Audio
Device)
.
10 Use your webcam application to stream as you normally would with a
webcam device and microphone input.