User Manual-Windows

68
Chapter 8, Using Matrox MXO2 with Adobe Premiere Pro
pulldown, you can still display the closed captions by selecting Enable
overlay on output
as explained below.
3 Under Video Output, select Enable overlay on output if you want to
overlay the closed captions on all the MXO2 video outputs, which lets you
display closed captioning on video monitors that don’t have a closed
captioning feature.
Remarks
$ For the overlay to be displayed, closed captioning display must be enabled
in the Adobe Premiere Pro Program Monitor pop-up menu (choose
Closed Captioning Display > Enable). If you’re using Premiere
Pro CC, you must also choose
Overlay Settings > Settings, and in the
displayed dialog box, select
Enable overlays for Transmit.
$ When using Premiere Pro CC, the closed captioning overlay is supported
for playback only. The overlay will not be exported to tape.
$ When Enable overlay on output is selected, the bit depth of your video
output is forced to 8-bit, and you won’t be able to change the bit depth
setting on the
Video Output page. Therefore, if you want to output 10-bit
video, you must clear this option before changing the bit depth setting for
your video output.
$ Selecting Enable overlay on output may cause dropped frames in your
video output. If you select this option and also choose to embed the closed
captioning in the video output, you should turn off the closed captioning
feature for all video monitors connected to the MXO2 video outputs to
avoid simultaneously displaying both the embedded and overlaid closed
captions.
4 Click OK to save your settings.