Owner Manual

The results are only valid for the tested sample(s).
This report may only be copied or reprinted in its entity, parts of it only with a written acceptance by Eurofins.
392-2017-00132101_H_EN Page 11 of 11
chart to ensure the uncertainty and reproducibility of the method.
The stability of the analytical system is checked by a general function test of device and column, and by use
of control charts for monitoring the response of individual substances prior to each analytical sequence.
7.6 Accreditation
The testing methods described above are accredited on line with EN ISO/IEC 17025 by DANAK (no. 522).
This accreditation is valid worldwide due to mutual approvals of the national accreditation bodies (ILAC/IAF,
see also www.eurofins.com/galten.aspx#accreditation.
Not all parameters are covered by this accreditation. The accreditation does not cover parameters marked
with an asterisk (*), however analysis of these parameters is conducted at the same level of quality as for the
accredited parameters.
7.7 Uncertainty of the Test Method
The relative standard deviation of the overall analysis is 22%. The expanded uncertainty Um equals 2 x
RSD. For further information please visit www.eurofins.dk/uncertainty.