Installation Instructions

Quick Click All Weather Tile

No special tools, glue or screws are needed to install your floor-

ing. All you need is a rubber mallet, measure tape and a saw.

Step 1

Step 6 Step 5

Step 3 Step 4

Step 2

Step 1—Start the installation in a corner and install tiles at an angle.

Step 2—Fix the connection tabs over the protruding rings.

Step 3—Using a rubber mallet, tap the connection tabs together, interlocking the tiles.

Step 4—Use a jigsaw to cut tiles for a perfect fit.

Step 5—Use edge/corner strips (from optional finishing kit) for a smart and safe finish of

your flooring.

Step 6—Enjoy your new Quick Click Slate All Weather Floor!

PAGE 1
Quick Click All Weather Tile Installation Instructions No special tools, glue or screws are needed to install your flooring. All you need is a rubber mallet, measure tape and a saw. Step 1 Step 3 Step 5 Step 2 Step 4 Step 6 Step 1—Start the installation in a corner and install tiles at an angle. Step 2—Fix the connection tabs over the protruding rings. Step 3—Using a rubber mallet, tap the connection tabs together, interlocking the tiles. Step 4—Use a jigsaw to cut tiles for a perfect fit.