User`s manual

Table of Mainboard Components

Label Component

AGP1 Accelerated Graphics Port

ATX1 Power connector

BT1 Three volt realtime clock battery

CASFAN1 Auxiliary case cooling fan

CD1 Small (For Panasonic)

CD2 Big (For SONY)

CNR1 Communications Networking Riser slot

CPUFAN1 Cooling fan for CPU

DDR1~DDR2 Two 168 pin DDR SDRAM

DIMM1 ~ DIMM2 Two 184-pin DIMM sockets

FDD1 Floppy disk drive connector

IDE 1 Primary IDE channel

IDE 2 Secondary IDE channel

J1 Case open detection connector

J2 Front-oriented microphone/line-out port header

J4 Sleep button connector

J5 Another Green LED Indicator for signal color

LED

JP1 Clear CMOS jumper

JP2 Keyboard and USB power on jumper

JP3 BIOS protection jumper

JP4 CPU frequency selection jumper

LED1

Memory module LED

PANEL1 Connector for case front panel switches and

LED indicators

PCI1 ~ PCI5 Five 32-bit add-in card slots

SIR1 Serial infrared cable header

SOCKET 462 Socket A for AMD Athlon processor

SPEAKER Speaker connector

USB2/3 Front panel USB headers

WOL1 Wake On LAN wakeup connector

WOM1 Wake On Modem wakeup connector

The red indicator LED1 turns on if your system is still pow-

ered, at which time memory modules cannot be installed or

uninstalled.