User`s manual

ECP Mode Use DMA (3)

When the onboard parallel port is set to ECP mode, the par-

allel port can use DMA 3 or DMA 1.

Game Port Address (201)

This item sets the I/O address for the game port.

Midi Port Address (330)

This item sets the I/O address for the Midi function.

Midi Port IRQ (10)

This item sets the interrupt request for the Midi function.

Press <Esc> to return to the Integrated Peripherals screen.

Init Display First (PCI Slot)

Use this item to specify whether your graphics adapter is in-

stalled in one of the PCI slots or is integrated on the

mainboard.

OnChip USB Controller (All Enabled)

Enable this item if you plan to use the Universal Serial Bus

ports on this mainboard.

USB Keyboard Support (Disabled)

Enable this item if you plan to use a keyboard connected

through the USB port in a legacy operating system (such as

DOS) that does not support Plug and Play.

IDE HDD Block Mode (Enabled)

Enable this field if your IDE hard drive supports block mode.

Block mode enables BIOS to automatically detect the optimal

number of block read and writes per sector that the drive can

support and improves the speed of access to IDE devices.

PWRON After PWR-Fail (Off)

This item determines the power state after a power failure. Set

this item to On to enable your computer to automatically re-

start after a power failure