User`s manual

Power Management Setup Option

This option lets you control system power management. The

system has various power-saving modes including powering

down the hard disk, turning off the video, suspending to RAM,

and software power down that allows the system to be auto-

matically resumed by certain events.

The power-saving modes can be controlled by timeouts. If the

system is inactive for a time, the timeouts begin counting. If

the inactivity continues so that the timeout period elapses, the

system enters a power-saving mode. If any item in the list of

Reload Global Timer Events is Enabled, then any activity on

that item will reset the timeout counters to zero.

If the system is suspended, or has been powered down by

software, it can be resumed by a wake up call that is generat-

ed by incoming traffic to a modem, a LAN card, a PCI card, or

a fixed alarm on the system realtime clock,

Power Management Setup

Item Help

ACPI function [Enabled]

ACPI Suspend Type [S1(POS)]

Power Management Option [User Define]

HDD Power Down [Disable]

Suspend Mode [Disable]

Video Off Option [Suspend --> Off]

Video Off Method [DPMS Support]

MODEM Use IRQ [3]

Soft-Off by PWRBTN [Instant-Off]

IRQ/Event Activity Detect [Press Enter]

Menu Level

↑

↑↑

↑

↓

↓↓

↓

→

→→

→

←

←←

←

: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General

Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults