User`s manual
56
IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following
screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQ/Event Activity Detect
Item Help
USB Resume from S3/S4/S5 [Disabled]
VGA [OFF]
LPT & COM [LPT/COM]
HDD & FDD [ON]
PCI Master [OFF]
PowerOn by PCI Card [Enabled]
Wake Up On LAN/Ring [Enabled]
RTC Alarm Resume [Disabled]
x Date (of Month) 0
x Resume Time (hh:mm:ss) 0 0 0
IRQs Activity Monitoring [Press Enter]
Menu Level
↑
↑↑
↑
↓
↓↓
↓
→
→→
→
←
←←
←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
This item opens a submenu that enables you to set events
that will resume the system from a power saving mode.
USB Resume from S3 (Disabled)
When enabled, the system power will resume the system from
a power saving mode if there is any USB port activity.
VGA (Off)
When set to On, the system power will resume the system
from a power saving mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
serial ports, or the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
hard disk drive or the floppy diskette drive.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not
power on the system.