User Manual

2. Plug the Field Charger’s vehicle recharge cord into the vehicle’s power connector as shown.
The plug is designed to fit one way only.
3. Press and hold the CHARGE button on the Field Charger until the green LED charge indicator
lights up, showing that the battery is being charged.
NOTE: if the RED indicator comes on or flashes (or if both the green and red indicators flash,
refer to “LED Functions” below.
4. The green LED charge indicator will glow steadily, showing that the battery is being charged.
5. The charging process takes about 4 minutes. When the green LED charge indicator flashes,
the charging cycle is complete. The Field Charger will shut off automatically after charging.
7. Disconnect the vehicle recharge cord from the vehicle. The vehicle cannot be operated while
connected to the Field Charger.