User Manual

Create whatever course you can imagine by choosing your obstacles and positioning them
wherever you want. You’ll discover hundreds of mind-bending combinations!
When you build an obstacle course, follow these simple guidelines:
1. Obstacles can be positioned anywhere around the console except over the two start spaces.
2. Be sure to leave at least one empty space between
each obstacle.
3. Do not place any obstacles over the calibration point except
the teeter-totter (see page 17-18).
4. Remember, you can only travel past the propeller wheel in one
direction – make sure you set it up in the direction you want
to go (see page 19).
20
OBSTACLES
Only the teeter-totter will function
over calibration point.
Empty space
between obstacles
BUILDING A COURSE
Start Spaces
should be empty