User Manual

THE GAMES
28
CHASE THE LIGHTS
1. Set up the obstacle course as desired but be sure to place the teeter-totter above the
calibration point. You will be moving back and forth a lot when playing “Chase the Lights,”
and the teeter-totter is the only obstacle that allows you to travel in either direction over
the calibration point (see pages 17-18).
2. Place a ball in the teeter-totter.
3. Turn on the console.
4. When the console says, “Select game,” press SELECT (white button) until you hear
“Chase the Lights.” Press ENTER (gray button).
5. Press SELECT to choose the number of players (from 1 to 4) and press ENTER.
6. Press SELECT to choose the difficulty (Beginner, Intermediate or Advanced) and press ENTER.
Easier difficulty settings will give you more time to play.
7. The console will tell the first player to “Put on the headset.” When the headset
is in place and turned on (see Quick Start section), press SELECT.
Number of Players: 1-4
Difficulty Levels (Time Limit):
Beginner (5 minutes)
Intermediate (3 minutes)
Advanced (1 minute)
Object: “Tag” as many lights
as you can before time runs
out! Beat your best score or
compete against other players
– whoever tags the most
lights wins!