User Manual

32
TROUBLESHOOTING
TROUBLESHOOTING
CONNECTION PROBLEMS
If you receive the message “Check headset sensors,” make the following adjustments. Be sure to wait about 5 seconds
after each adjustment to see if the issue has been corrected – if so, you will hear “Calibrating headset.”
 •Makesurethesensorispressedtightandatagainstyourforehead.Adjusttheheadbandifnecessary.
 •Makesurenohairiscaughtbetweenthesensorandyourskin.
 •Movetheforeheadsensortoaslightlydifferentpositionaboveyourlefteye.
 •Removethenreattachtheclipstoyourears.
 •Makesurebothclipsarepressedatagainstyourearlobes.
 •Leavingtheheadsetonyourhead,turntheheadsetoffandbackon.
 •Cleanthesurfacesoftheforeheadandearclipsensorswithaclothorpapertowelmoistenedinwarm,soapywater.
 •Visitwww.mindflexgames.com for additional help.
NOTE: If you receive the message “Check headset sensors” during a game, the game timer will pause until you
reestablish a good connection.