Manual

Calibrating the Scanner
Calibrating the scanner may be the single most important step to take in order to get
good results. Calibrating your scanner on a regular basis ensures that you get the
most accurate results from your scan. To calibrate:
1. Make sure your scanner is connected to your computer and powered on.
2. Open the Matter and Form scanner software.
3. There are three options on the left on the start screen. Click "Calibrate" to start
the calibration process.
On Windows:
On Mac:
4. A new screen will open. Select the calibration device that came with your scanner.
If you were provided the card, you will be shown how to assemble it.
5. Follow the diagram below and place your calibration box or card in the center of
the scanner bed. Click "Continue Calibration".
12
