Manual

6. The scanner will rotate the calibration card (or box) left and right on the turntable,

firing its lasers and collecting a range of data. Please be patient. This process can

take several minutes.

7. Once the first step of calibration is done, follow the instructions for Calibration

Step 2 and move the calibration card (or box) forward or back. Click "Continue

Calibration" when the card (or box) is in its new position.

8. The scanner will rotate and fire its lasers again. Be patient and avoid moving the

calibration device. Step 2 will take slightly longer than Step 1 as the software

compares the data between Step 1 and Step 2.

