Manual

If you selected “Multi-Colored”, the Scan Viewer will show you the camera feed of
the scanner bed. The laser that tunes for lighter colors and the red spectrum
colors of the color wheel will flash on.
6. Looking at the camera feed, position the object so that the laser line passes over
the lighter colored area by using the Rotate Right or Rotate Left buttons provided
on screen or moving the object by hand.
7. Click “Confirm Lightest Color”. The software will conduct the tuning process to
determine the best exposure for the light colored area.
8. Repeat Step 6 for the darker or blue spectrum colored area of the object.
9. Click “Confirm Darkest Color”. The software will conduct the tuning process to
determine the best exposure for the dark colored area.
10. Once tuning is complete, scanning will automatically start. Sit back and relax as
the scanner does the rest!
11. If you want to stop the scan for whatever reason, click on the “Finish” button. You
will have the option of saving the scan “as is”, quitting the scan without saving
and resuming the scan.
18
