Manual

1. Under the Manual Control tab, click on
the Laser Detection tab to start the laser
detection process.
2. Adjust the top Laser Detection Exposure
slider to capture clean laser lines on the
light areas of the object. When you’re
satisfied that you’ve got the best lines
possible, proceed to step 3.
3. Check the Enable High Contrast
Scanning checkbox, which enables the
bottom Laser Detection Exposure Two
slider.
4. Adjust the Laser Detection Exposure
Two slider for a lower exposure (usually
you’ll be in the -9 to -5 range) until the
dark areas of the model fill in with a
clean laser line. Remember that the
lower value exposures are brighter,
which means they take longer, so you’ll
need to wait a moment on each to see
the results in the visualization in Laser
Line Detection.
High Contrast Clay Blocks with
Good Exposure (clean, solid line)
65
