Installation Guide

1
PACKAGE CONTENTS
Unpack your fan and check the contents. You
should have the following items:
a. Hanger bracket assembly
b. Ball / down rod assembly
c. Coupling cover
d. Fan motor assembly
e. Metal blades with cages (decorative* or
safety**) (2) or Wood blades (2)
f. Receiver with 6 wire nuts
g. Transmitter+holder+2 mounting screws
h. Allen wrench
i. Mounting hardware:
wood screws (2), screws (2),
lock washers (2), washers (2),
star washers (2), wire nuts (3)
j. Cage attaching hardware:
screws+spring washers (8)
washers (8)
*If blades are metal and accompanied by
safety cages (see Diagram e-i): To reduce the
risk of injury to persons, install fan so that
blades are at least 7.0 Ft. above the floor in
the US and 8.3 Ft./2.5 M above the floor in
Canada.
**If blades are metal and accompanied by
decorative cages (See Diagram e-ii) or
unguarded wooden blades (See Diagram
e-iii): To reduce the risk of injury to persons,
install fan so that blades are at least 10.0 Ft.
above the floor in the US and 10.0 Ft./3.05 M
above the floor in Canada.
Philips screw driver
Standard, flat-head screw driver
11 mm wrench
Step ladder
Wire cutters
a
b
c
d
e-i
e-ii
e-iii
f
g
hi
j
TOOLS AND MATERIALS
REQUIRED