Eliza-H 56” CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz For Damp Location QUICK ASSEMBLY NOTES: * Do not wire in fan while house wires are Live. Turn power off at breaker before installation begins. * Do not use any controls, wall or remote, other than those provided by Matthews Fan Company. * Please do not use any electric or battery powered tools in the assembly and installation of this or any other Matthews Fan Company product.
TABLE OF CONTENTS Tools and Materials Required.........................................................................................1 Package Contents ......................................................................................................... 1 Safety Rules................................................................................................................... 2 Mounting Options........................................................................................................
1. TOOLS AND MATERIALS REQUIRED Philips screwdriver Blade screwdriver 11 mm wrench Step ladder Wire cutters 2. PACKAGE CONTENTS c Unpack your fan and check the contents. You should have the following items: d a. Blade set (3) b. Blade holders (3) c. Mounting bracket (preassembled with fan motor assembly) d. Decorative ring e. Fan motor assembly f. Hand held transmitter+holder+2 mounting screws g. Wall transmitter incl. 2 mounting screws and 3 wire nuts h. Wall plate incl.
3. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 8. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan. 2. All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 9.
4. MOUNTING OPTIONS If there isn't an existing UL listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials. The outlet box and its support must be able to fully support the moving weight of the fan (at least 35 lbs). Do not use plastic outlet boxes.
5. ATTACHING THE FAN BLADES Screws 1. Remove the motor housing from the fan motor by removing the six screws from the rim of motor housing. (Fig. 4) Motor housing 2. Attach the blade holder to the blades using the screws provided. Repeat process with other blades. (Fig. 5) Collar 3. Fasten the blade assembly to the fan motor using the blade screws supplied. Repeat process with other blades. Tighten each screw and make sure the blade is straight. (Fig.
6. HANGING THE FAN Decorative ring Screws REMEMBER to turn off the power. Follow the steps below to hang your fan properly: Step 1. Replace the motor housing to the fan motor by using the screws previously removed. Slide the decorative ring down and through the motor housing. (Fig. 7) Motor houaing Step 2. Attach the mounting bracket to the outlet box using the two screws and washers provided with the outlet box.
7. MAKE THE ELECTRIC CONNECTIONS Outlet box White ("AC IN N") Green or bare copper (ground) Black ("AC IN L") NOTE: Your fan has included as standard equipment two types of controls: a hand held remote control and a wall mounted wall control. You may use both as long as the dip switches are calibrated the same. Select one of the controls at this moment for installation and programming of your fan. Black (motor) Ground (green) (Connect to ground wire on hanger bracket if no house ground wire exists.
B. Wall mount remote control BLACK 1. Connect the fan supply (black) wire to the black household supply wire (Conductor cable between ceiling and wall outlet box). (Fig. 11) WHITE SUPPLY CIRCUIT a. Fan wire connection 2. Connect the neutral fan (white) wire to the white neutral household wire. Ground Conductor Ceiling Outlet Box BLACK WHITE GREEN 3. Connect the fan ground wire (green) to the household ground wire. 4. Check that the two plugs, large and small are making proper contact.
8. FINISHING THE INSTALLATION Safety cable Step 1. Move fan motor into position over the four mounting holes and secure with the four screws provided. The safety support is provided to prevent the fan from falling. Secure the safety cable securely onto the hook. (Fig. 13) Screws Motor Step 2. Raise up decrotive ring and line up the four tabs with the four grooves on the motor housing. Once lined up, slide the decrotive ring up to the motor housing until snug. (Fig.
9. PROGRAMMING YOUR FAN AND OPERATING THE REMOTE CONTROL AND WALL CONTROL Before programming takes place, fan must be fully assembled and mounted to the ceiling with blades attached. You must also choose which control you will be using for programming the fan, the remote or the wall control. No other wall control should be used with this fan but that which was included. Using another wall control other than ours will damage your fan and void your warranty.
NOTE: If the self calibration test failed, turn the AC power off; restore power and process the self calibration test again. NOTE: During self calibration test, the remote and the wall control are non-functional. NOTE: The learning frequency function and calibration test will continue to retain the last frequency and calibration set even when the power is shut off. If the frequency is changed self calibration test will occur again.
11. CARE OF YOUR FAN Here are some suggestions to help you maintain your fan 1. Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from ceiling.) 2. Clean your fan periodically to help maintain its new appearance over the years. Use only a soft brush or lint-free cloth to avoid scratching the finish.
INSTRUCTIONS ON HOW TO PROGRAM MULTIPLE FANS ON SINGLE CIRCUIT BREAKER. 1. Turn the power off at the breaker/service box. 2. Hang all fans by convenience cable located in top of motor to hook in ceiling bracket. This will allow you to easily access the leads from house and the leads of the fan. Do not connect house and fan leads, yet. 3. Make house lead connections to those of first fan, but do not install blades or motor cover. 4. Turn the breaker on. 5.
LIMITED LIFETIME WARRANTY MATTHEWS-GERBAR, LTD. DBA MATTHEWS FAN COMPANY LIFETIME LIMITED WARRANTY. Ceiling fans are warranted by Matthews-Gerbar, Ltd. to the original user against defects in workmanship or materials under normal use and inside installation for: Motors: Lifetime of original purchaser: Labor & Component parts: (lights, finish, blades, etc…): one year after date of purchase, Light Bulbs: no warranty. Any part, which is determined by Matthews-Gerbar, Ltd.
