Installation Guide

5
Figure 8
Figure 7
Figure 9
Washers
Screws
Mounting bracket
Outlet box
6. HANGING THE FAN
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Step 1. Replace the motor housing to the fan
motor by using the screws previously removed.
Slide the decorative ring down and through the
motor housing. (Fig. 7)
Step 2. Attach the mounting bracket to the outlet
box using the two screws and washers provided
with the outlet box. For best performance be sure
the mounting bracket is level and secured firmly
against the ceiling. You may need to insert
additional washers (not provided) between the
outlet box and mounting bracket to make it level.
(Fig. 8).
Step 3. Lift fan into position by hanging the motor
assembly onto the hook from the mounting
bracket allowing it to hang freely (Fig. 9).
Screws
Decorative ring
Motor houaing
Motor
Motor