Installation Guide

4. MOUNTING OPTIONS

If there isn't an existing UL listed mounting box,

then read the following instructions. Disconnect the

power by removing fuses or turning off circuit

breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and building

materials. The outlet box and its support must be

able to fully support the moving weight of the fan

15.9 kgs (35lbs) or less. Do not use plastic outlet

boxes.

Figures 1,2 and 3 are examples of different ways to

mount the outlet box.

Note: You may need a longer downrod to maintain

proper blade clearance when installing on a steep,

sloped ceiling. (Fig. 3)

To hang your fan where there is an existing fixture

but no ceiling joist, you may need an installation

hanger bar as shown in Figure 4.

Outlet box

Figure 1

Figure 3

Figure 4

Outlet box

Figure 2

Provide strong

support

Recessed

outlet box

Ceiling

mounting

bracket

Angled ceiling

maximum 25