Installation Guide

9
Figure 18
Figure 19
11. INSTALLING THE
DECORATIVE
BOTTOM COVER
1. Raise decorative bottom housing up
against bottom of fan housing and secure it to
the fan by turning the decorative bottom
cover clockwise until snug. DO NOT OVER-
TIGHTEN. (Fig. 18)
NOTE: The additional metal light cover
included with your fan is an option to replace
the glass diffuser (assembled in the decora-
tive bottom housing) in the event that you
prefer not to use the light feature of your fan.
(Fig. 19)
Decorative
bottom housing
Decorative
bottom housing
Metal light cover