Geschirrspüler 8061 SILENTIC Standmodell / integrierbares Modell Gebrauchsanweisung
Informationen Sehr geehrte Kundin, sehr geehrter Kunde, vielen Dank für Ihren Einkauf bei Quelle. Überzeugen Sie sich selbst: auf unsere Produkte ist Verlaß. Damit Ihnen die Bedienung leicht fällt, haben wir eine ausführliche Anweisung beigelegt. Sie soll Ihnen helfen, schnell mit Ihrem neuen Geschirrspülautomat vertraut zu werden. Bitte lesen Sie diese Anweisung vor der Inbetriebnahme aufmerksam durch und beachten Sie auch die aufgeführten Sicherheitshinweise.
Inhaltsverzeichnis Sicherheitshinweise und Warnungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hinweis zur Verpackungsentsorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entsorgung der Altgeräte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wirtschaftlich und umweltbewußt spülen . . . . . . . . . . . . . . . . . . . . . . . . . . . Wasserschutzsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sicherheitshinweise und Warnungen Bewahren Sie die Gebrauchsanweisung sorgfältig auf, damit Sie sie auch in Zukunft zu Rate ziehen können. Sollten Sie das Gerät verkaufen oder Dritten überlassen, so sorgen Sie dafür, daß das Gerät komplett mit der Gebrauchsanweisung übergeben wird, damit der neue Besitzer sich über die Arbeitsweise des Gerätes und die diesbezüglichen Hinweise informieren kann.
forderlich, so muß die Geschirrspülmaschine vorher ausgeschaltet werden. Achtung! Es kann je nach Programmphase heißer Dampf austreten. • Gegenstände, die mit Benzin, Lack, Eisen- oder Stahlspänen, korrosiven Chemikalien (Säuren oder Basen) in Kontakt gekommen sind, dürfen nicht in der Geschirrspülmaschine gespült werden. • Spitze Messer und scharfkantige Besteckteile müssen in den Oberkorb gelegt oder mit der Spitze nach unten in den Besteckkorb gestellt werden.
Hinweis zur Verpackungsentsorgung Verpackungen und Packhilfsmittel von Quelle-Elektro-Großgeräten sind mit Ausnahme von Holzwerkstoffen recyclingfähig und sollen grundsätzlich der Wiederverwertung zugeführt werden. Verpackungen von Großgeräten können Sie bei der Anlieferung der Geräte unseren Vertragsspediteuren zurückgeben. Diese veranlassen dann die Weitergabe zur Verwertung bzw. Entsorgung.
Wirtschaftlich und umweltbewußt spülen • Schließen Sie den Geschirrspüler nur dann an Warmwasser an, wenn Sie eine Warmwasseranlage haben, die nicht elektrisch beheizt wird. • Stellen Sie die Wasserenthärtungsanlage korrekt ein. • Spülen Sie das Geschirr nicht unter fließendem Wasser vor. • Wählen Sie die Spülprogramme nach Art und Verschmutzungsgrad des Geschirrs. • Wählen Sie ein Rapid-Programm, wenn die Speisereste nicht angetrocknet sind und eine geringe Trocknung ausreicht.
Geräteansicht Deckendusche Gummidichtung für Ankopplung des Wasserzulaufs zum oberen Sprüharm Sprüharme Vorratsbehälter für Spezialsalz Vorratsbehälter für Klarspüler Behälter für Reinigungsmittel Typschild Siebe Achtung! Die integrierten Modelle werden ohne Arbeitsplatte geliefert.
Installation Aufstellen des Geschirrspülers • Geschirrspüler muß standsicher und waagrecht ausgerichtet auf festem Boden aufgestellt werden. • Schraubfüße mit dem beiliegenden Schraubschlüssel herausschrauben, um Bodenunebenheiten auszugleichen und Gerätehöhe an andere Möbel anzugleichen. Bei integrierbaren Geschirrspülern sind die hinteren Gerätefüße mit einem Schraubendreher vorne am Gerät einzustellen, siehe Montageschablone.
gewicht wie folgt entfernt werden: – Schrauben aus den Winkelstücken an der Rückseite herausdrehen (1)+(2). – Arbeitsplatte des Geräts ca. 1cm nach hinten schieben (3), vorne anheben (4) und wegnehmen. – Schraube (5) aus der Halterung der Arbeitsplatte herausdrehen und Halterung dann schräg nach hinten herausziehen (6). – Auf der rechten Gehäusewand die hintere Schraube (7) herausdrehen. – Rechte Gehäusewand leicht zur Seite ziehen (8) und Ausgleichsgewicht herausnehmen (9).
• Nachdem die Gerätearbeitsplatte und das Ausgleichsgewicht entfernt wurden, muß zum Schutz der Küchenarbeitsplatte ein Wrasenschutzblech montiert werden, das dem Gerät als Zubehör beiliegt. Montage siehe Seite 36. • Standgeräte können mit einer Dekorplatte optisch an die Küchenfront angepaßt werden. Für die Montage ist ein Dekorrahmen erforderlich, den Sie, falls nicht im Lieferumfang vorhanden, als Zubehör beim Quelle-Kundendienst beziehen können.
• Damit die Wasserentnahme in der Küche nicht eingeschränkt wird, empfehlen wir, einen zusätzlichen Wasserhahn zu installieren oder an den vorhandenen Wasserhahn ein Abzweigstück anzubauen. • Falls der Wasserzulaufschlauch nicht lang genug ist, muß er durch einen ausreichend langen Wasserstopschlauch ersetzt werden. Niemals vorhandenen Zulaufschlauch verlängern! Bitte wenden Sie sich an den Kundendienst. Schnur durch das Loch des Schlauchkrümmer ziehen und an der Wand oder am Wasserhahn befestigen. .
Verlegen der Schläuche Wasserzu- und -ablaufschlauch sind weitgehend knickfrei. Überzeugen Sie sich davon, daß auch beim Einschieben des Spülers an seinen endgültigen Platz, die Schläuche nicht geknickt oder gequetscht werden und nach den Seiten im Sockelrücksprung verlegt sind. Besondere Vorschriften des örtlichen Wasserwerkes sind genauestens zu beachten.
Aufstellen und Anschließen des Geschirrspülers Anschlußtechnik Die Einplanung der Anschlüsse für Wasserzu- und -ablauf, sowie Strom, muß immer seitlich vom Geschirrspüler erfolgen. Hinter dem Gerät ist kein Platz dafür vorhanden. Die nachfolgende Abbildung zeigt unter Berücksichtigung verschiedener Gegebenheiten beispielhaft, wie die Sanitärund Elektroinstallation durchgeführt werden kann.
Bedienblende Enthärter-Taste Bedienfeld Bedienfeld Das Bedienfeld besteht aus dem EIN/ AUS-Schalter und den Programmtasten mit LED-Anzeigen. Das Gerät ist eingeschaltet bzw. das Spülprogramm ist gewählt, wenn die LED-Anzeige neben der Taste leuchtet. Enthärter-Taste Die Taste hat 2 Funktionen. Zusätzlich zum aufgedruckten Spülprogramm kann mit dieser Taste, in Kombination mit dem EIN/AUS-Schalter der Wasserenthärter des Geschirrspülers eingestellt werden (siehe Seite 16).
Inbetriebnahme Vor der ersten Inbetriebnahme Entfernen Sie vor Inbetriebnahme alle Klammern, mit denen die Geschirrkörbe für den Transport gesichert werden. Führen Sie dann folgende Schritte durch: • Wasserenthärter einstellen • Spezialsalz für Wasserenthärter einfüllen • Klarspüler einfüllen Wasserenthärter einstellen Um Kalkablagerungen auf Geschirr und im Geschirrspüler zu verhindern, muß das Geschirr mit weichem, d.h. kalkarmen Wasser gespült werden.
3. Ist die Härtestufe entsprechend des verwendeten Wassers eingestellt, EIN/AUS-Schalter drücken, das Gerät wird abgeschaltet. Die Härtestufe ist nun gespeichert. LE SA ALT Z S AL S EL S Spezialsalz für Wasserenthärter einfüllen Verwenden Sie nur Spezialsalz für Geschirrspüler. Füllen Sie niemals andere Salzarten (z.B. Speisesalz) oder Geschirrspülreiniger in den Salzvorratsbehälter. Dies würde den Wasserenthärter zerstören.
Salz nachfüllen zeigersinn drehen und abnehmen. Spezialsalz muß nachgefüllt werden, wenn auf der Bedienungsblende die Signallampe SALZ leuchtet. Klarspüler einfüllen Durch den Klarspüler erhält man flekkenfreies, glänzendes Geschirr und klare Gläser. Verwenden Sie nur Marken-Klarspüler für Geschirrspüler. Der Behälter für Klarspüler ist auf der Innenseite der Geschirrspülertür. 1. Tür öffnen 2.
Klarspülerdosierung einstellen Klarspüler nachfüllen Beim Geschirrspülen wird aus dem Vorratsbehälter Klarspüler ins Spülwasser abgegeben. Die Dosierung können Sie von 1-6, entsprechend 1-6 cm3 Klarspüler, einstellen. Vom Werk ist die Dosierung auf „4“ eingestellt. Dosierung nur dann verändern, wenn auf Gläsern und Geschirr Schlieren, milchige Flekken oder angetrocknete Wassertropfen zu sehen sind. (siehe unter „Was ist, wenn...“) 1.
Bedienung / Handhabung Besteck und Geschirr einordnen Zum Spülen im Geschirrspüler nicht geeignet: • Bestecke mit Holz-, Horn-, Porzellan- oder Perlmuttgriffen • nicht hitzebeständige Kunststoffteile • älteres Besteck, dessen Kitt temperaturempfindlich ist • geklebte Geschirr- oder Besteckteile • Zinn- bzw.
Besteckkorb Einordnen im unteren Korb Der Besteckkorb wird im unteren Geschirrkorb eingesteckt. Damit alle Besteckteile vom Wasser umspült werden und um zu verhindern, daß sich die Gebrauchsflächen der Löffel nicht ineinander legen, sollten Sie 1. den Gittereinsatz auf den Besteckkorb aufstecken 2. kurze Messer, Gabeln und Löffel mit dem Griff nach unten in den Gittereinsatz des Besteckkorbs stellen. Stark verschmutztes, größeres Geschirr wird im Unterkorb gründlich gereinigt.
Einordnen im oberen Korb Empfindliche kleinere Geschirrteile werden im Oberkorb schonend gereinigt. . • Oberkorb bis zum Anschlag herausziehen. • Kleine, leichte empfindliche Geschirrteile wie Untertassen, Tassen, Gläser, sowie temperaturbeständige Kunststoffteile in den Oberkorb einordnen. • Zum Einstellen hoher Teile lassen sich die Tassenauflagen hochklappen. • Wein-, Sekt- sowie Cognacgläser in die Ausschnitte der Tassenauflagen lehnen bzw. hängen. • Gläser, Becher usw.
Oberkorb in der Höhe verstellen Der Oberkorb ist höhenverstellbar. • Absenken des Oberkorbs 1. Oberkorb bis zum Anschlag herausziehen. 2. Oberkorb am Griff der rechten, hinteren Tassenablage anheben und absenken. Im abgesenkten Zustand beträgt die Geschirrhöhe – im Oberkorb max. 24 cm. – im Unterkorb max. 29 cm. Vor dem Spülen überprüfen • Sind alle Geschirrteile richtig eingeordnet? Das ist besonders bei leichten Teilen wichtig, damit sie bei der intensiven Wasserumwälzung ihren Stand sicher behalten.
Reiniger Es dürfen nur Reiniger verwendet werden, die speziell für Haushaltsgeschirrspülautomaten geeignet sind. Es spielt dabei keine Rolle, ob die Reiniger flüssig, pulver- oder tablettenförmig sind. Reiniger muß vor jedem Programmablauf eingefüllt werden – nur im Programm Vorspülen ist kein Reiniger erforderlich. Das Reinigungsmittel wird während des Programms automatisch eingespült. Die Wirksamkeit verschiedener Reiniger kann unterschiedlich sein.
Bio-Spülprogramme und Kompaktreiniger Reinigungsmittel für Geschirrspüler lassen sich anhand ihrer chemischen Zusammensetzung in zwei Grundtypen einteilen: • herkömmliche, alkalische Reiniger mit ätzenden Bestandteilen • niederalkalische Kompaktreiniger mit natürlichen Enzymen. BIO-Spülprogramme in Verbindung mit Kompaktreinigern entlasten die Umwelt und schonen Ihr Geschirr, denn BIO-Spülprogramme sind speziell auf die schmutzlösenden Eigenschaften der Enzyme im Kompaktreiniger abgestimmt.
Spülprogramm Spülprogramm starten 1. Überprüfen Sie, ob Geschirr und Besteck im Geschirrspüler so eingeordnet sind, daß die Sprüharme sich frei drehen können. 2. Wasserhahn ganz aufdrehen. 3. Tür schließen. 4. EIN/AUS-Taste drücken. Anzeige der EIN/AUS-Taste leuchtet. 5. Programmtaste für das gewünschte Programm drücken (siehe „Programmtabelle“). Programmanzeige leuchtet. Nach ungefähr 6 Sekunden beginnt das gewählte Spülprogramm.
Beladungserkennung Geschirrspüler ausschalten Wird ein Spülprogramm gestartet, obwohl im Ober- und/oder Unterkorb nur wenig Geschirr ist, paßt eine intelligente Elektronik die Spülwassermenge und die Dauer des Spülprogrammes der Geschirrmenge an. Dadurch ist es möglich, auch wenig Geschirr schnell und wirtschaftlich zu spülen. Bei halber Beladung (6 Maßgedecke) werden bis zu 2 Liter Wasser und 0,2 kWh Strom eingespart. Geschirrspüler erst ausschalten, wenn in der Programmablaufanzeige ENDE aufleuchtet.
Kurzanweisung Die wichtigsten Handgriffe bei der Inbetriebnahme des Gerätes sind folgende: 1. Wasserzulauf- und -ablaufschlauch anschließen. 2. Netzstecker in die Steckdose einstecken. 3. Wasserhahn öffnen. 4. Wasserhärtebereich einstellen. 5. Klarspüler und Spezialsalz einfüllen. 6. Geschirrspülerkörbe füllen und wieder einschieben. 7. Reiniger dosieren. 8. Tür schließen. 9. EIN/AUS-Taste drücken. 10.Programmtaste drücken. Das Spülprogramm läuft an.
Pflege und Wartung Auf keinen Fall handelsübliche Möbelpflege- oder aggressive Reinigungsmittel verwenden. • Bedienteile des Geschirrspülers bei Bedarf nur mit einem weichen Lappen und warmem, klarem Wasser reinigen. • Sprüharme brauchen nicht gereinigt zu werden. • Innenbehälter, Türdichtung und Wasserzulauf gelegentlich auf Verschmutzungen kontrollieren und gegebenenfalls reinigen. 4. Grobsieb (1) an der Grifföse fassen und aus dem Mikrofilter (2) herausziehen.
zeigersinn bis zum Anschlag verriegeln. Darauf achten, daß das Flächensieb nicht über den Spülraumboden heraussteht. Achtung: Ohne Siebe darf auf keinen Fall gespült werden. Edelstahlteile Bottich und Türinnenteil bestehen aus Edelstahl. Ein Rostanflug ist auf eisenhaltiges Wasser zurückzuführen: „Fremdrost“ ist auch bei Edelstahlteilen möglich. Mit feinkörnigem Putzmittel entfernen. Keine chlorhaltigen oder eisenhaltigen Scheuermittel verwenden.
Behebung kleiner Störungen Hinweise zur Behebung kleiner Störungen Wenn Sie unsere Ratschläge beachten, werden Sie immer Freude an Ihrer Geschirrspülmaschine haben. Sollte trotzdem eine Störung auftreten, so prüfen Sie bitte erst die nachfolgend angeführten Punkte, bevor Sie einen Fachmann zu Rate ziehen. Was ist, wenn... ... das Programm nicht beginnt? • Sind die Sicherungen der Hausinstallation in Ordnung? • Ist das Gerät an das elektrische Netz angeschlossen? • Ist die Tür richtig geschlossen? ...
... das Geschirr nicht trocken wird und ohne Glanz bleibt? • Befindet sich noch Klarspüler im Vorratsbehälter? • Haben Sie Marken-Klarspüler verwendet? ... auf Gläsern und Geschirr Schlieren, Streifen, milchige Flecken oder blauschimmernder Belag vorhanden ist? • Es fließt zuviel Klarspüler ein. Stellen Sie die Klarspüldosierung niedriger ein. ... auf Gläsern und Geschirr angetrocknete Wassertropfen sichtbar sind? • Es fließt zuwenig Klarspüler ein. Stellen Sie die Klarspüldosierung höher ein.
Kundendienst Störung - was tun ? Gute Qualität und eine Konstruktion, die der modernsten Technik entspricht, sorgen für eine einwandfreie Funktion des Gerätes. Sollte trotzdem einmal eine Störung auftreten, prüfen Sie bitte zunächst, ob Sie auch alle in dieser Gebrauchsanweisung enthaltenen Hinweise und Ratschläge beachtet haben. Möglicherweise ist nur eine Kleinigkeit die Ursache für die Störung.
Anschriften der Quelle-Kundendienststellen Region Nord 38114 Braunschweig, Aussigstr. 2 28219 Bremen, Bayernstr. 173 27576 Bremerhaven, Schlachthofstr. 23 29223 Celle, Sprengerstr. 42 26723 Emden, Zweiter Polderweg 14 24941 Flensburg, Boschstr. 2 38644 Goslar, Pracherstieg 2A 22041 Hamburg, Eftigerstr. 19 31789 Hameln-Afferde, Langes Feld 25 30165 Hannover, Beiersdorfstr. 6 31137 Hildesheim, Cheruskerring 47 25524 Itzehoe, Lise-Meitner-Str. 23 24113 Kiel, Flintbeker Str. 5 23554 Lübeck, Schwartauer Landstr.
Notizen 35
Unterbau von Standgeräten Unterbau in Küchenzeilen Standgeräte sind unterbaufähig, wenn die Gerätearbeitsplatte und das Ausgleichsgewicht abgenommen sind. Die Höhe und die Nivellierung durch die Schraubfüße einstellen und das Gerät einbauen. Hinweise • Bei Unterbau von Standgeräten muß zum Schutz der Küchen-Arbeitsplatte ein Wrasenschutzblech montiert werden, das dem Gerät als Zubehör beiliegt.
• Ist die Arbeitsplatte aus Marmor oder Granit, müssen die mitgelieferten Winkelstücke auf das Wrasenschutzblech aufgesteckt ➀ und das Wrasenschutzblech dann am linken und rechten Unterbauschrank festgeschraubt ➁ werden.
Dekorplatte für Standgeräte Dekorplatten-Montage Zur farblichen Angleichung an die Küche kann eine Dekorplatte angebracht werden. Der erfoderliche Dekorrahmen ist beim Quelle-Kundendienst erhältlich, wenn er nicht schon im Lieferumfang enthalten ist. Zur Küche passende Dekorplatten müssen von den Küchenherstellern bezogen werden. Dekorplattenmaße Höhe 590 mm Breite 581 mm Dicke max. 4 mm Hinweis Damit sich dünne Dekorplatten nicht durchwölben bzw.
Technische Daten / Abmessungen Technische Daten: Abmessungen: Fassungsvermögen Durchflußerhitzer Ablaufpumpe Umwälzpumpe Spannung Standmodell Gesamthöhe Höhe ohne Arbeitsplatte Gesamtbreite Gesamttiefe Tiefe ohne Arbeitsplatte Gewicht 12 Maßgedecke 2035 Watt 30 Watt 150 Watt 220-230 Volt 50 Hz Sicherung, HLS-Automat 10 Ampere Gesamtanschluß 2200 Watt Wasserdruck mindestens 1 bar Wasserdruck maximal 10 bar Bei Wasserdruck über 10 bar muß ein Druckminderventil vorgeschaltet werden.
Hinweise für Prüfinstitute Vor den Prüfungen muß der Salzbehälter des Wasserenthärters und der Vor- ratsbehälter für Klarspüler voll aufgefüllt werden. Prüfnorm: IEC 436 / EN 5O 242 Vergleichsprogramme: – Normal 65 °C (Referenzreiniger Typ A) – Normal BIO 50 °C (Referenzreiniger Typ B) Fassungsvermögen: 12 Maßgedecke einschl.
Notizen 41
Programmübersicht Programm Intensiv 70° mit Vorspülen Normal 65° mit Vorspülen Normal BIO 50° mit Vorspülen Spar BIO 50° Geeignet für Stark verschmutztes Eß- und Kochgeschirr mit angetrockneten Speiseresten, besonders Eiweiß und Stärke. Taste INTENSIV 70° Normal verschmutztes Eß- und Kochgeschirr mit angetrockneten Speiseresten. NORMAL 65° Normal verschmutztes Eß- und Kochgeschirr auch mit temperaturempfindlichen Teilen (z.B. Glas, Kunststoff).
Verbrauchswerte Durchschnittlicher Energieverbrauch in kWh bei Kaltwasseranschluß 2) Durchschnittlicher Wasserverbrauch in Litern 2) 100 - 110 1,45 - 1,65 18 - 20 Vorspülen Reinigen Zwischenspülen Klarspülen Trocknen 85 - 95 1,15 - 1,35 14 - 16 Vorspülen Reinigen Zwischenspülen Klarspülen Trocknen 85 - 95 1,05 - 1,25 14 - 16 Reinigen Zwischenspülen Klarspülen Trocknen 75 - 85 1,05 - 1,25 10 - 12 Reinigen Zwischenspülen Klarspülen Trocknen 30 0,85 12 Vorspülen 10 0,1 4 Programmablauf
Garantie-Information Für unsere technischen Geräte übernehmen wir im Rahmen unserer Garantiebedingungen die Garantie für einwandfreie Beschaffenheit. Die Dauer der Garantie richtet sich nach unserem zum Zeitpunkt des Kaufs gültigen Angebot. Ist keine längere Frist angegeben, so beträgt die Garantiezeit 6 Monate. Die Garantiezeit beginnt mit der Übergabe. Den Zeitpunkt weisen Sie bitte durch Kaufbeleg nach (Kassenzettel, Rechnung, Lieferschein u.ä.). Bewahren Sie diese Unterlagen bitte sorgfältig auf.