Installation Instructions

nanoLTE E61 AP Hardware Installation AP and PSU Regulatory Information
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 36
6.4 Regulatory Statements for PSU
Safety Approvals cUL/UL
SAA
CE
C-Tick
Mechanical Characteristics Length: 82.7mm (3.26in)
Width: 55mm (2.17in)
Height: 39.1mm (1.54in)
Weight: 150g (5.29oz)
PSAA30R Characteristics
AC Input Voltage Rating 100 to 240V AC
Emissions FCC Class B
EN55022 Class B
AC Input Voltage Range 90 to 264V AC
Immunity IEC61000-4-2 Level 4
IEC61000-4-3 Level 2
IEC61000-4-4 Level 2
IEC61000-4-5 Level 2
IEC61000-4-6 Level 2
IEC61000-4-8 Level 1
IEC61000-4-11
ENC61000-3-2
AC Input Frequency 47 to 63Hz
Input Current 0.8A (RMS) maximum at 120V AC
0.5A (RMS) maximum at 240V AC
Leakage Current 0.25mA maximum
Over-Voltage protection Auto restart
Inrush Current <60A for 100V AC at maximum load
<100A for 240V AC at maximum load
(Cold start at ambient 25C)
Over-Current Protection Auto-restart without damage
Short-Circuit Protection Output can be shorted without damage
Input Power Saving 0.3W maximum at no load
Dielectric Withstand (Hi-pot) Test Input to Output: 3000V AC for 1 min., 10mA
Output Efficiency >83.5% average efficiency
Insulation Resistance Input to output: 7M ohm, 500V DC
Environmental Temperature Operation 0°C to +40°C
Non-operation -25 to +75C
Humidity 20 to 90%
DC Output Connector (Barrel Type) 2.1 x 5.5 x 9.5mm Center Positive Standard