USB Mavic ® avril 2009 Wintech USB Wintech Alti Wintech HR Wintech Ultimate
WINTECH USB Ultimate 2010- User Guide USE The Mavic team has put all its passion, experience and skill into the design and manufacture of your computer. It will be an important tool for you in the improvement of your performance. Thank you for putting your trust in Mavic products. 11. SLEEP MODE 12. TRIP RESET 13. USE OF LAP TIME (CR) 14. ELEVATION SET UP AND DATA REVIEW MENU INSIDE INSTALLATION 2. INSTALLING THE COMPUTER MOUNT 4. INSTALLING THE SPEED SENSORS FITTING / REMOVING THE COMPUTER 4.1.
INSTALLATION 1. PRODUCT DESCRIPTION Main Unit Box 2. INSTALLING THE COMPUTER MOUNT a. Computer b. Cardio Belt c. Wintech Manager software CD d. Memo stick Sensor Box E-Skewer e. E-Skewer sensor f. Computer mount g. 25,4mm handlebar reducer h. Wheel magnet E-Bolt i. E-Bolt sensor f. Computer mount g. 25,4mm handlebar reducer h. Wheel magnet j. Adjustment magnets b 2.1 Install the mount on the handlebar, to the right of the stem. To fix it to an oversize, 25.4 diameter handlebar, use the 25.
. INSTALLING THE SPEED SENSORS 4.2. E-Bolt 4.1 E-Skewer The speed sensor is integrated into a fixing nut compatible with all quick-releases on the market. To install it, unscrew the fixing nut on your quick-release. Insert the quick release from the left-hand side of your bike and tighten the electronic fixing nut from the right-hand side. Adjust the tightness of the nut according to the recommendation described in section 4.1 of this user guide.
BASIC NAVIGATION 5. INSTALLING THE WHEEL MAGNET 5.1 Position the magnet on a spoke so that it passes opposite either of the lever marks and at a maximum distance of 5 mm. The magnet must be facing outward from the wheel. 5.2 If you use the E-Bolt sensor, on a mountain bike, it might be necessary to use the adjustment magnets to reduce the distance between the sensor and the magnet.The magnet must be facing outward from the wheel. 5.1 7. DESCRIPTION OF THE DISPLAY BK 1, 2 or H Number of bike used 5.
8. FUNCTION DISPLAY DEFAULT SEQUENCE 9. Default button function matrix 8.1 B riefly press right button (BPR) to scroll down the “while riding” displays (live information) Screen 1 – Current speed – Number of bike used – Distance unit (KM or Mi) – Current elevation (Wintech USB Alti and Wintech USB Ultimate only) – Current heart rate (Wintech USB HR and Wintech USB Screen 2 Screen 1 Ultimate only) – Current pedalling cadence (optional) 8.
10.1. H eart rate alarm and workzone 10.2. Digital pairing (Wintech USB HR and Wintech USB Ultimate only) Press and hold the right button for 6 seconds. Briefly press again the right button (BPR) to enter the different stages of the heart rate section: 10.1.1. Sound Alarm. Briefly press the left button (BPL) to turn on or off the alarm. Briefly press the right button (BPR) to validate your choice and move to the next stages of the heart rate settings (Heart rate limits). 10.1.2. Cardiac limits.
To pair a 2nd bike sensor or the home trainer sensor, proceed again to the operations described above, selecting the correct bike number and corresponding sensor. Heart Rate belt and cadence sensor does not need to be paired again when pairing a new sensor. Digital pairing operations must be performed after changing a battery. – If you change the computer battery, all sensors (speed, cadence and heart rate belt) must be paired again.
See part 14.2 of this user guide to learn how to use the Home Elevation. The Home altitude is useful to easily and rapidly recalibrate your computer before you start a new ride. The Home altitude shall be set up at your most frequent point of departure. We recommend that you precisely know the elevation of this point. 10.3.4. Choose your temperature unit (Celsius or Fahrenheit).
.4.2. Choose the bike number you wish to set up the wheel circumference and distance unit for. Briefly press the left button (BPL) to change from BK 1, to BK 2 to BK H (for home trainer). Briefly press the right button (BPR) to validate your selection and switch to the wheel circumference set up screen. The first wheel circumference of the selected bike flashes. 10.4.3. Set up the wheel circumference of the selected bike.
USE 10.6. Odometers set up 10.6.1. Enter the Odometers set up menu: From any active display, press and hold the right button (BPR) for 6 seconds. – On Wintech USB Ultimate, briefly press the left button (BPL) 5 times to move to the odometer section. “odo” appears on the screen. – On Wintech USB Alti and Wintech USB HR, briefly press the left button (BPL) 4 times to move to the odometer section. “odo” appears on the screen.
. TRIP RESET 13. USE OF LAP TIME (CR) 12.1. To reset your last trip, press and hold the 2 buttons together for 2 seconds. The reset data are: – Trip distance – Average speed – Maximum speed – Vertical speed – Cumulated vertical gain – Lap time and their associated data Clock, Odometers, Home and Current altitude are not reset. In the course of a session you can use up to 9 lap times in order to evaluate your performance on specific hills or sections.
14. ELEVATION SET UP AND DATA REVIEW MENU 14.2. Recall of Home Altitude (Wintech USB Alti and Wintech USB Ultimate only) 14.1. Entering the Elevation set up and data review menu From any screen, press and hold the left button (BPL) for 2 seconds to enter the elevation set up and data review menu. The elevation set up and data review menu is sequentially organized in sub-menus, in the following order: 1. Recall of home altitude “Ho” (Wintech USB Alti and Wintech USB Ultimate only) 2.
.4. Trip Altitude and Heart Rate data review (Wintech USB Alti, Wintech USB HR and Wintech USB Ultimate only) Enter the elevation set up and data review menu: From any screen, press the left button for 2 seconds. – On Wintech USB Alti and Wintech USB Ultimate, briefly press the left button (BPL) twice to switch to the altitude and heart rate review data section: “Info” appears on the computer screen. – On Wintech USB HR “Info” appears on the computer screen.
14.5. Lap time data review Enter the elevation set up and data review menu: From any screen, press the left button for 2 seconds. – On Wintech USB Alti and Wintech USB Ultimate, briefly press the left button (BPL) 3 times to switch to the lap time data review section: “Cr” appears on the computer screen. – On Wintech USB HR, briefly press the left button (BPL) once to switch to the lap time data review section: “Cr” appears on the computer screen. – On Wintech USB “Cr” appears on the computer screen.
14.6. Odometers review Proceed this way to read the different bike / speed sensor odometers data. Enter the elevation set up and data review menu: From any screen, press the left button for 2 seconds. – On Wintech USB Alti and Wintech USB Ultimate, briefly press the left button (BPL) 4 times to switch to the odometer review section: “odo” appears on the computer screen.
15. VERTICAL SPEED EXPLAINED (Wintech USB Alti and Wintech USB Ultimate only) The Vertical Speed (VS) function available on Screen 2 gives you the opportunity to measure your performance on any ascension of a pass, or a steep climb. It expresses the vertical elevation achieved in one hour (in feet or meter); and depends on the cyclist speed and the slope of the climb.
– Altimeter: from -500m to 5000m / -1640 ft to 16400 ft. Accuracy: +/- 5m / +/- 16 ft (Wintech USB Alti and Wintech USB Ultimate only) – Vertical speed: from 0 to 2500 m/h (8200 ft/h). Accuracy: +/- 10m/h (32,8 ft). Calculated on the elevation change within the last 30 seconds. (Wintech USB Alti and Wintech USB Ultimate only) – Average vertical speed calculation: (Elevation at stop point – elevation at start point)/ATM in minutes x 60.
WINTECH MANAGER The Wintech Manager software enables you to: – Display on a PC all data of each trip coming from the Wintech computer – Organize these data into reports (weekly,monthly,yearly) – Manage up to 3 user accounts – Export the data to share them – Set up your Wintech computer – Customize your Wintech computer’s screens – Get links to external information (website, instruction manual…) – Print and e-mail this information – Store your bike settings The Wintech Manager software is compatible
Shows downloaded trip details (see section 22. Trip of this user guide) Uploads settings to your Wintech computer Stores bike settings information (see section 24. Settings of this user guide) Shows downloaded trip reports, by week, month and year (see section 23. Reports of this user guide) Provides more information on your Wintech computer (see section 26. Links of this user guide) 21.
22. TRIPS Adding a new trip manually You can manually create a new trip by entering data manually (in case you rode without your Wintech computer for instance). Navigation menu: click Home to go back to main menu save Go to previous or next trip. If multiple trips are recorded on the same day, use these buttons to go to the next or previous trip of the day Select a day. Select a start time.
23. REPORTS Yearly report: Sums up all the trip for a specific year on a graph with – Months on the horizontal axis – Monthly odometer on the vertical axis Weekly / Monthly reports: Sums up all the trip for a specific week / month on a graph with – Trip days on the horizontal axis – Trip distance on the vertical axis Navigation menu: click “Home” to go back to main menu Change user or edit user account (see section 24.1.
24. COMPUTER SETTINGS AND USER ACCOUNT MANAGEMENT As you can manage up to 3 different users on the same PC, when you click on Computer settings, the next screen asks you to choose among the registered users, to make sure you will change the parameters of the correct user.
.1 Create a new user or edit an already existing user To display the user management dialog box: – From the main menu, click on “Settings” – From the Settings screen, click on “User”: Chose “Edit” to go the settings screen and edit the user account: Edit User’s personal information Edit User’s preferred distance, altitude and temperature units Edit the bike parameters associated to each sensors you may have paired Edit User’s heart rate information (for Wintech USB HR and Wintech USB Ultimate only) If
24.2 Screen customization 25. BIKE SETTINGS Access the screen customization display from the settings main display: You can store here your bikes’ settings information here: Choose the bike number Print the current screen Free comments about bike 1 or bike 2 Seat position Navigation menu Customize the screen displayed using the right button of the Wintech computer. The top line is not customizable.
27. TECHNICAL SPECIFICATION The Wintech Manager software can store data coming from 3 different users during 10 years , with 300 trips a year of 5 hours each, for each of the 3 users. System requirements: Windows XP or Vista only Processor at 1.