User's Manual

ManualsBrandsMavin Technology ManualsAudio EquipmentBLUETOOTH STEREO HEADSET

Table Of Contents

User Guide

Bluetooth Stereo Headset

Function of Buttons

：

Turning on or off/ Pairing/ Answer/ Ending/ Reject/ play/ pause/ stop

Led

：

Volume-up, Redial

：

Volume-down, Voice-Dialing

：

Forward

：

Backward

Charging Port

Microphone

3.5mm audio connector

Turning on or off

Charging Port

Led

Status Button Duration LED Pattern

Stereo Headset/

Stereo Adapter

Power On Long (2~3 seconds) Blue Blinking

Power Off Long (3~4 seconds) Red Off

Enter Pairing Very Long (4 seconds)

(PIN code: “0000”)

Blue/ Red Blinking

Pairing Successfully/ Standby Blue Blinking

Answer / Ending Calls Short

Redial Long (2 seconds)

Voice Dial Long (2 seconds)

Reject Long (3 seconds)

Play/ Pause/ Stop Short (1 second)

Volume Up/ Down Short (1 second)

Forward/ Backward Short (1 second)

Low Battery Red Blinking

Charging 4 hours Red

Fully Charged Red Off

1. Charging the battery

Plug the travel charger into the AC outlet and then connect the charger into the DC input of the headset and adapter. The red

indicator will light on. When the battery is full, the red indicator will be off, disconnect the power adapter. When the battery

is new, it is not fully charged. It takes 4 hours to fully charge the battery. Afterwards, it will take nearly 3 hours to fully

charge the battery.

2.1 Use with audio devices

(1). Turning on or off

(a). Press the button for 2~3 seconds. The blue indicator will begin to flash. The headset and adapter are now

powered on.

(b). Press the button for 3~4 seconds. The red indicator will begin to flash. Now the headset and adapter are turned

off.

(2). Plug the 3.5mm audio connector into the 3.5mm audio port device.

Note: To use stereo adapter with DVD, TV or Hi-Fi system etc., please use the AV cable to audio device.

(3). Pairing

(a). Press the button of the headset and adapter for 4 seconds till the blue and red indicators begin to flash

alternatively. The headset is now in pairing mode and it will connect to the stereo adapter automatic. If the blue and red

indicators do not flash alternatively, press the button again.

(b). When the pairing process is successfully completed, the blue indicator will flash. The headset is now in standby mode

and will connect the stereo adapter automatically.

Note: If no pairing is possible over a period of time (Aprox. 1 minute), the pairing process will be stopped. You have to

repeat STEP 2.1(3) to successfully complete the pairing.

Summary of content (4 pages)

PAGE 1
User Guide Bluetooth Stereo Headset Function of Buttons ：Turning on or off/ Pairing/ Answer/ Ending/ Reject/ play/ pause/ stop Led ：Volume-up, Redial ：Volume-down, Voice-Dialing ：Forward ：Backward Charging Port Microphone 3.
PAGE 2
(4). Wearing the headset Hold both sides of the headset 》》Ear hook the headset from the back of head 》》Gently adjust headset position. (5). Adjusting the volume of the headset for listening to music of the headset to increase the listening volume of the headset. (a). Press the button (b). Press the button to decrease the listening volume of the headset. Note: You want to listen to music (after initial pairing), just adjust the volume from your headset and audio device (ipod/ MP3/ CD player etc.
PAGE 3
Children Please keep the stereo headset away from children, as the small parts may cause choking hazard. Battery Information (1). New batteries For time first time use, please charge the battery for at least 4 hours. (2). Battery care (a). Only qualified Service Centers are authorized to remove or replace the battery. (b). The rechargeable battery has a long service life if treated with care. (c). The battery can only be charged in a temperature range or 0 ℃ to 45℃. (d).
PAGE 4
FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.