Specification

SPECIFICATIONS
Capacity 1,000 lb. combined,
500 lb. individually
(Static Conditions)*
Max. Tailgate Height Ǝ
Dimensions Ǝ L x Ǝ : x Ǝ H
IMPORTANT SAFETY INFORMATION
1. Before use:
a. Read and understand manual.
b. Inspect before every use; do not
use if parts loose or damaged.
c. Turn vehicle’s ignition off
and set parking brake.
d. Clean dirt, oil and debris off
ramps and allow ramps to dry.
e. Set up only on solid, level,
dry surface.
f. Turn ramps so flange end faces
downward. Position ramps so that
tongues fully contact tailgate.
g. Properly connect safety chains.
2. Load and unload vehicle slowly. Do
not ride vehicle up or down ramps.
3. Do not exceed 500 lb. capacity per
ramp or 1,000 lb. capacity evenly
distributed across two ramps.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
4. Use safety chains as intended only.
c. if tailgate on carrying vehicle
is higher than 3Ǝ, or
d. to load vehicle with wheel
width wider than ramp.
6. Ground contact. Use your Ramps
on a solid, level, flat, dry surface.
Make sure the Tongue edge fully
contacts the tailgate of the vehicle.
7. Clean Ramps. Prior to each use,
clean dirt, oil, or any debris off ramps.
8. This product is not a toy. Do not allow
children to play with or near this item.
9. All persons not involved in the
loading process must stand
clear of the loading ramps.
Keep children away. Children must
not be allowed in the work area.
10. Do not exceed tailgate weight capacity.
11. Avoid working alone. If an accident
happens, an assistant can bring help.
12. Keep work area clean and well lit.
Cluttered and dark areas invite injuries.
5. Use as intended only. Do not use:
a. as ladder,
b. to load/unload 3-wheeled vehicles,
13. Store idle equipment:
:hen not in use, store ramps in
a dry location to inhibit rust.
14. Dress properly. Do not wear loose
clothing or jewelry. Protective clothes
and nonskid footwear are recommended
when working. :ear restrictive hair
covering to contain long hair.
customerservice@focus-ontools.com
2
1-800-348-5004

Summary of content (1 pages)