Service manual

Section 1: Introduction
SATO D508/D512 Operator Manual Page 1-6
1.1 GENERAL SPECIFICATIONS (CONT’D)
Barcodes
SYMBOLOGIES
Supported 1D formats
(excluding customized barcode
addressing in firmware)
UPC-A/E
EAN-8/EAN-13
CODABAR
CODE39
CODE93
CODE128
UCC/EAN128
Interleaved 2 of 5
Industrial 2 of 5
Matrix 2of5
RSS Composite
MSI
POSTNET
Bookland
Supported 2D formats PDF 417
Micro PDF 417
Truncated PDF 417
Maxicode
Data Matrix
QR Code
Ratios 1:2, 1:3, 2:5 User definable bar widths (depending on software)
Bar Height 4 to 600 dots (depending on software)
Rotation 0°, 90°, 180° and 270° (depending on software)
*All specifications subject to change without notice.
Physical Attributes
DIMENSIONS
Width 7.8 in. (198 mm)
Depth 9.1 in. (230 mm)
Height 6.6 in. (167 mm)
Weight 5.5 lbs (2.5 Kg) excluding AC adaptor
POWER REQUIREMENTS
Voltage USA: AC 115 V (+/- 10 %)
50/60 Hz (+/-1%)
Power Consumption 67W nominal
ENVIRONMENTAL
Operating 32° to 95°F (0° to 35°C),
30 to 80% RH, non-condensing
Storage 23° to 140°F (-5° to 60°C),
30-90% RH, non-condensing
REGULATORY APPROVALS
Safety USA : UL(UL60950-1)
CANADA : C-UL(CSA C22.2 No.60950-1-3)
EMC/EMS USA : FCC15B (ClassB)