User manual

the adhesive strips to the back side of the mounting plate.

You should be able to read the letters on the back side

(according to gure).

<PA66>

• Remove the protective lm from the adhesive strip.

• Press the assembled MAX! Eco switch with the back

side to the wall in the position where it should subse-

quently be attached.

Screw mounting:

• Choose a site for installation.

Make sure that electrical lines in the wall will not be

damaged.

• Position the mounting plate on the desired site on the

wall. Make sure that the arrow on the mounting plate is

pointing upwards.

• Use a pen to mark the positions of 2 bore holes A (dia-

gonally opposite) in the mounting plate on the wall. The

bore holes B can be used for installation with a ush-

mounting box.