User manual
20
• To activate teach-in mode, press and hold down one of
the buttons on the MAX! Eco switch for at least 3 sec-
onds. The LED ashes in teach-in mode.
• Click on „Next“ in the software to give the device a name
and assign it to a room.
Successful teaching-in of the MAX! Eco switch is
conrmed by the LED lighting up once.
If you do not teach-in any devices, the teach-in pro-
cedure deactivates automatically after 30 s.
The MAX! Eco switch communicates with the MAX!
components only centrally via the MAX! cube. If this
central interface fails, MAX! components can no long-
er receive commands from the MAX! Eco switch.
> 3 sec.