User manual
21
8. Teach-out/Reset
The MAX! Eco switch can be reset to the initial state man-
ually. Restoring the initial state deletes all settings and in-
formation about taught-in devices.
Before you reset the MAX! Eco switch to the factory
settings, rst delete the device from the MAX! soft-
ware.
• First remove the batteries from the battery compartment.
• Wait 60 seconds.
• Press and hold down the button at the top or bottom.
• Re-insert the batteries at the same time.
• Press and hold down the button until the device LED
starts to ash.
• Release the button. The factory settings are restored.
9. LED ashing sequences and
transmission behaviour
The LED’s ashing sequences have different meanings:
Flashing sequence Meaning
1x ash Conrmation following successful sending
of the radio command
2x ashes Duty cycle has been exceeded. The longest
period to wait before sending again would
be an hour.
3x ashes Error message, radio command not sent
successfully