Specifications

③ Nail loading:
Place a coil of nails over the Nail Post in the Magazine. Uncoil enough nails to reach
the Feed Pawl, and place the second nail between the teeth on the Feed Pawl. The
nail heads fit in slot on Nose.
Nail
Feed Pawl
④ Swing Magazine Cover closed.
⑤ Close the Door.
Check that Door Latch engages. (If it does not engage, check that the nail heads are in
the slot on the Nose).
TEST OPERATION
① Adjust the air pressure at 12 bar (170 p.s.i.) and connect the air supply.
② Without touching the Trigger, depress the Contact Arm against the work-piece.
Pull the Trigger. (The tool must fire the fastener.)
③ With the tool off the work-piece, pull the Trigger.
Then depress the Contact Arm against the work-piece.
(The tool must fire the fastener.)
④ Adjust the air pressure as much as the lowest possible according to the diameters and length of fastener
and the hardness of work-piece.
11