Technical data

HN.50.Y1.02 17
Restoring factory settings Factory settings of all accessible parameters
are stored permanently in PVG CIP. This
function is used to restore all parameter set-
tings to “Factory standard” by overwriting the
existing parameter settings.
Restoring can be performed at several levels
by writing a signature “LOAD” in reverse order
to the respective subindexes:
• All parameters
• Communication parameters
- Node ID
- Baudrate
• Functions
• Connection between Prof 1 CIP and
PVG CIP
Units -
DOAL 64616F6C HEX
Standard -
Precision 1
OD index 1011 HEX