Use and Care Manual

1
1. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS (SEE Fig.1)
2. TOOL SPECIFICATIONS
3. FASTENER SPECIFICATIONS
ENGLISH
OPERATING INSTRUCTIONS MANUAL
1 Frame 8 Exhaust Cover
2 Cylinder Cap 9 Trigger Lock Dial
3 Contact Arm 0 Plug
4 Nose a Aiming Guide Locator (HN65J)
5 Magazine b Adjust Dial
6 Trigger c Rafter Hook (HN90F)
7 Grip
PRODUCT NO. HN90F HN65 HN65J
HEIGHT 331mm 13" 301mm 11-7/8" 291mm 11-1/2"
WIDTH 126mm 5" 129mm 5" 102mm 4"
LENGTH 298mm 11-3/4" 291mm 11-1/2" 291mm 11-1/2"
WEIGHT 2.6 kg 5.7 lbs. 1.9 kg 4.3 lbs. 2.0 kg 4.4 lbs.
RECOMMENDED OPERATING PRESSURE 12 to 23 bar 170 to 320 p.s.i.
LOADING CAPACITY 300 Nails 400 Nails 100 Nails
AIR CONSUMPTION 3.4L at 18 bar / 257 p.s.i.
operating pressure
1.7L at 18 bar / 257 p.s.i.
operating pressure
1.4L at 18 bar / 257 p.s.i.
operating pressure
PRODUCT NO. HN90F HN65 HN65J
TYPE OF COLLATION
PLASTIC SHEET
COLLATED
WIRE WELDED PLASTIC SHEET
COLLATED
WIRE WELDED PLASTIC SHEET
COLLATED
NAIL LENGTH
45 to 75mm
1-3/4" to 3"
45 to 90mm
1-3/4" to 3-1/2"
32 to 65mm
1-1/4" to 2-1/2"
38 to 65mm
1-1/2" to 2-1/2"
40 to 65mm
1-1/2" to 2-1/2"
SHANK DIAMETER
2.5 to 2.9mm
.099" to .114"
2.5 to 3.8mm
.099" to .148"
2.5 to 2.9mm
.099" to .113"
2.1 to 3.3mm
.083" to .131"
3.3 to 4.1mm
.131" to .162"
SHANK TYPE Smooth, Screw Smooth, Ring, Screw Smooth, Screw Smooth, Ring, Screw Smooth
HEAD DIAMETER
5.5 to 7.7mm
.217" to .303"
6.0 to 7.7mm
.236" to .303"
5.0 to 7.0mm
.197" to .275"
7.2mm
.283"