Use and Care Manual

4. TECHNICAL DATA

NOISE

These values are determined and documented in accordance to EN12549:1999+A1:2008.

NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point

of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.

In addition, reference should be made to noise reduction measures.

NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports (see also ISO

11690-1).

VIBRATION

These values are determined and documented in accordance to ISO 28927-13

NOTE: The vibration emission value above is a tool-related characteristic value and does not represent the influence to the hand-arm-sys-

tem when using the tool. Any influence to the hand-arm-system when using the tool will for example depend on the gripping force, the con-

tact pressure force, the working direction, the adjustment of energy supply, the workpiece, the workpiece support.

5. APPLICATIONS

6. ABOUT PRODUCTION YEAR

This product bears production number at the lower part of the grip of the main body. The two digits of the number from left indicates the

production year.

HN90F HN65 HN65J

A-weighted single-event sound power level ------ LWA, 1s, d 93.1dB 90.0dB 89.9dB

A-weighted single-event emission sound pressure level at work station------ LpA, 1s, d 81.7dB 85.6dB 86.2dB

Uncertainty 3dB

HN90F HN65 HN65J

Vibration characteristic value 6.42 m/s

4.13 m/s

4.34 m/s

Uncertainty 1.5 m/s

HN90F HN65 HN65J

∗ Floor and wall framing

∗ Subflooring

∗ Roof and wall sheathing

∗ Fencing

∗ Floor and wall framing

∗ Subflooring

∗ Roof and wall sheathing

∗ Fencing

∗ Fastening metal connectors for wood

construction.

(Example)

1 7 8 2 6 0 3 5 D

Year 2017