Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 114
Key Length Cyphercast Softcell
56 bits Blowfish (56-bit) Blowfish (56 bit)
64 bits Blowfish (56-bit), DES Blowfish (56 bit)
128 bits Blowfish (56-bit & 128-bit), DES, AES Blowfish (56-bit & 128 bit) AES
When a Smartcard is correctly inserted and recognized by the receiver, the Smartcard Status and Serial Number
information fields will be updated.
The remaining fields, common for both the Cyphercast and Softcell pages, are displayed on the Softcell Configuration
Page Figure B- 3 and described under the Cyphercast Configuration Edit page Figure B- 4.
Figure B- 3 Softcell Configuration Page
Aside from the Common Menu Items, the following menu items are available:
Menu Item Description
Show Selecting this button will always return you back to the Softcell Configuration page, as shown in
Figure B- 4. The current configuration as entered under the configuration edit page is always
displayed here, along with the current status of the Smart Card that is inserted in your receiver.
Edit Selecting this button will enter the Cyphercast Configuration Edit page, as shown in Figure B- 4.
The edit fields on this page are explained below the page. Note the warning message on the
page - Send Update will cause the receiver to reboot, thus interrupting data services.