Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 127
Figure E- 1 FlexKey Configuration Page
The following fields can be edited on the FlexKey Configuration Edit page:
Edit Field Description
ECM Multicast
Address
Enter the valid multicast IP address in dotted decimal notation. This address and the UDP Port
are configured for receiving the ECM data, and must match the configuration of the FlexKey
head end.
ECM UDP Port Enter a valid UDP port number for ECM stream. Note this port number is required, and must
match the FlexKey head end configuration.
Figure E- 2 Edit FlexKey Configuration Page